Carver 396 Motor Yacht 2003, Owner'S Manual

Page: 55 / 234

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
43
3808 8/99
control the direction of the boat: forward, neutral, or
reverse. The port shift lever controls the port engine;
the starboard shift lever controls the starboard engine.
Switch these breakers "ON" to activate the shift levers.
Refer to the "Shift/Throttle" portion of Section 5 for
more information on operating the shift levers.
Main - One
This breaker protects the circuitry between the DC
Control Center and the "house" battery bank. This
breaker must be "ON" to provide power to the DC
Control Center.
Main - Two
This breaker protects the circuitry between the bridge
electronic equipment and the "house" battery bank. This
breaker must be "ON" to provide power to the bridge
electronic equipment.
Windlass
This breaker controls the flow of electricity to the con-
trols that operate the optional windlass. The windlass
controls are located at the helm. Switch this breaker
"ON" to activate the controls. Refer to the OEM infor-
mation for details on operating the windlass.
NOTE: The windlass circuit also contains an in-line
fuse that protects the windlass switch solenoid. This fuse
is located in the rope locker on the bow.
Battery Charger - Port Engine
This breaker protects the circuitry between the battery
charger and the port engine battery. When the breaker
is "ON" and the battery’s voltage decreases below a
predetermined level, the battery charger automatically
charges the battery.
Battery Charger - Starboard Engine
This breaker protects the circuitry between the battery
charger and the starboard engine battery. When the
breaker is "ON" and the battery’s voltage decreases
below a predetermined level, the battery charger auto-
matically charges the battery.