Carver 396 Motor Yacht 2003, Owner'S Manual

Page: 49 / 234

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
37
3808 8/99
wiper to clear water from the center windshield. Switch
this breaker "ON" to activate the wiper controls.
Wiper Starboard
This breaker controls the flow of electricity to the helm's
optional starboard windshield wiper controls. Use this
wiper to clear water from the starboard windshield.
Switch this breaker "ON" to activate the wiper controls.
Spare
This breaker is reserved for aftermarket accessories you
install on your boat.
Halon System
This breaker controls the flow of electricity to the fire
suppression system in the engine room. Switch this
breaker "ON" to activate the system. Refer to the OEM
information for details on operating this equipment.
Bilge Blowers
Always run the bilge blowers for at least 4 minutes
before starting the boat’s engines or the optional
generator.
These four breakers control the flow of electricity to the
bilge blower controls at the helm. Switch these breakers
"ON" to activate the controls.
Before you turn on the boat’s engines or optional gen-
erator, activate the bilge blowers. The blowers remove
any flammable vapor that may have accumulated in the
engine room, thus preventing the possibility of an
explosion when the engines or generator start.
Bridge Accessories
This breaker controls the flow of electricity to any
aftermarket accessories installed at the helm. Switch
this breaker "ON" to activate these accessories. Refer to
the accessories’ manuals for information on operating
the accessories.