Carver 396 Motor Yacht 2003, Owner'S Manual

Page: 190 / 234

W
INTERIZATION AND
S
TORAGE
S
ECTION
8
178
3808 5/99
d. Reconnect the seawater pickup hoses to the
seacocks. Leave the seacocks closed.
3. Switch the Forward and Aft Waste Pump circuit
breakers on the DC Control Center "ON".
4. Under the boat, place a large bucket beneath each
overboard discharge fitting to collect antifreeze
pumped out later in this procedure. Refer to the
"Thru-Hull Fittings" portion of Section 9 for the
location of the forward and aft overboard discharge
fittings.
You must use an approved antifreeze in your boat’s
sanitation system. Refer to the SeaLand Technical
Bulletin at the end of this section for information on
the proper type of antifreeze to use. Using the wrong
type of antifreeze can damage the sanitation system.
The repair of such damage is not included under the
terms of either the Carver Limited Warranty or the
sanitation system OEM’s warranty.
5. Flush 10 gallons of nontoxic recreational vehicle
antifreeze through the forward toilet.
6. Open the forward waste tank overboard discharge
seacock. The seacock is located beneath the forward
hatch in the salon. Refer to the "Interior Hatches"
portion of Section 9 for the location of this hatch.
7. Turn the forward waste pump ON/OFF switch ON.
The switch is located near the forward overboard
discharge seacock.
8. When a steady stream of antifreeze flows from the
forward overboard discharge fitting, turn the waste
pump "OFF".
9. Close the forward waste tank overboard discharge
seacock.
10. Flush 10 gallons of nontoxic recreational vehicle
antifreeze through the aft toilet.
11. Open the aft waste tank overboard discharge
seacock. The seacock is located beneath the aft
Open Closed