Carver 356 2004, Owner'S Manual

Page: 51 / 225

DC E
LECTRICAL
S
YSTEM
S
ECTION
2
42
3937 2/99
Spare
This breaker is reserved for aftermarket accessories you
would like to install on your boat.
The Safety Breaker Panel is mounted beneath the
lowest step in the stairway leading from the salon to the
aft deck. This panel is reserved for safety equipment
such as automatic bilge pumps. Some safety equipment
listed on the Safety Breaker Panel is directly wired to
the batteries and should remain in the "ON" position at
all times. This allows various pumps and other safety
equipment to remain active regardless of the position of
the battery selector switch.
While the safety equipment wired though this Safety
Breaker Panel does operate at all times even when the
battery selector switch is in the "OFF" position, it will
not run if a breaker trips. Therefore, it is important to
frequently check that these breakers are "ON" and
working properly.
Voltmeter - Battery One
This breaker protects the circuitry between the helm's
voltmeter and battery #1. When this breaker is "ON",
the voltmeter operates whenever the engine ignition is
engaged. The voltmeter indicates the charge level in
battery #1.
Voltmeter - Battery Two
This breaker protects the circuitry between the helm's
voltmeter and battery #2. When this breaker is "ON",
the voltmeter operates whenever the engine ignition is
engaged. The voltmeter indicates the charge level in
battery #2.
Stereo Memory
This breaker controls the flow of electricity to the boat’s
stereo system. This breaker should always be "ON" to
maintain the information programmed into the stereo’s
memory. If this breaker is ever switched "OFF", you will
have to reprogram the stereo. Refer to the OEM infor-
mation for details on programming the stereo.
Safety Breaker
Panel