Carver 356 2004, Owner'S Manual

Page: 189 / 225

W
INTERIZATION AND
S
TORAGE
S
ECTION
8
180
3937 3/99
tank to pump overboard. Position the valve to select
the forward waste tank.
6. Locate the forward head overboard discharge
selector valve located below the hatch in the galley
floor. This valve allows you to bypass the forward
waste tank and flush waste directly overboard.
Position the valve to "HOLDING TANK".
7. Flush 10 gallons of antifreeze through the forward
head.
8. Open the overboard discharge seacock located
beneath a hatch below the dinette’s aft cushion.
9. On the 12 Volt DC Power Main Breaker Panel,
switch the DC Main circuit breaker "ON", then
switch the Waste Pump circuit breaker "ON".
10. Turn "ON" the waste pump ON/OFF switch located
beneath a hatch below the dinette’s aft cushion.
This activates the waste pump.
11. When a steady stream of antifreeze flows from the
overboard discharge fitting, turn "OFF" the waste
pump.
12. Position the waste tank selector valve to select the
aft waste tank.
13. Locate the aft head overboard discharge selector
valve located below the aft hatch in the aft state-
room floor. This valve allows you to bypass the aft
waste tank and flush waste directly overboard.
Position the valve to "HOLDING TANK".
14. Flush 10 gallons of antifreeze through the aft head.
15. Turn "ON" the waste pump ON/OFF switch.
16. When a steady stream of antifreeze flows from the
overboard discharge fitting, turn "OFF" the waste
pump.
17. Switch the Waste Pump circuit breaker "OFF".
18. Close the overboard discharge seacock.