Carver 356 2004, Owner'S Manual

Page: 182 / 225

S
ECTION
8 W
INTERIZATION AND
S
TORAGE
173
3937 3/99
3. Clean the bilge as described in the "Bilge" portion
of Section 7 .
Before performing this procedure on the sanitation
system, your boat should be pulled from the water.
Refer to the OEM information for more information on
winterizing the sanitation system.
There are three types of sanitation systems: the stan-
dard system, the overboard discharge system and the
direct overboard discharge system.
Standard Sanitation System
1. Empty the waste tanks as described in the "Emp-
tying the Waste Tanks" portion of Section 4 .
Remove as much of the fresh water used in flushing
the tanks as possible.
2. If your boat has the optional seawater head system:
a. Close the seacock for each head.
Sanitation System
O
PEN
C
LOSED
b. Disconnect the seawater pickup hoses from the
seacocks.
c. Flush the heads until all water is drained from
the seawater pickup hoses.
d. Reconnect the seawater pickup hoses to the
seacocks. Leave the seacocks closed.