Wheel balancer 80-2000T. Operation Manual
p.21
21
To set the stick-on weight removes the protective film from the weight. Fasten the weight
in the upper position of the wheel (“12 h”) or in the lower position (“6 h”) on the distance in
accordance with Figure 5.8. Setting mode in "6 h" position is indicated by the icon shown in
Figure 5.7b.
a
b
c
a - clip-on weight set in "12 h" position
b – stick-on weight set in "12 h" position
c – stick-on weight set in "6 h" position
Figure 5.8
Figure 5.9 - Distances for stick-on weight setting
To move to another weight setting you can:
- press one of the keys
SET
or
SET
;
- push the wheel by hand with the force sufficient to overcome brake resistance. To
determine direction of wheel rotation use indicator shown in Figure 5.10. Its red lit stripe shows
the place for setting the weight.
Figure 5.10 - Indicator of the place for weights setting.
There is always an exact (unrounded) value of weight masses shown in the information field.
