Wheel balancer 80-2000T. Operation Manual
p.11
11
4.2.4 Mount lift control lever using 4 bolts in accordance with Figure 4.4.
Figure 4.4
4.2.5 Connect small-diameter pneumatic tubes, having aligned marks on tubes with marks
on fittings, as shown on Figure 4.5. Connect air supply hose to the inlet connection.
Recommended operation pressure is 8 to 10 Bar.
4.2.6 Adjust lift horizontal propel effort by means of a nut. Move the nut down to increase
propel effort, and vice versa, Figure 4.5.
4.2.7 Set protective cover in accordance with Figure 4.6.
Mount bracket of the cover on the casing of the machine with bolts M10x20 and washers
10. Mount motionless part of cover on the bracket of the cover with bolts M8x20 and washers 8.
Mount mobile part of cover on the axis bracket of the cover with bolts M10x75, washers 10 and
nuts M10.
Figure 4.5
Marks
Nut
Inlet connection
