65
//
GB
Set up the receiver. RX setup menu are like the picture
.
• Bind with a receiver: the transmitter enters in bind mode.
Once the receiver correctly bound, press the back button to
return to normal operation (picture
).
• RX battery monitor: monitors the receiver battery voltage
(picture ).
• External sensor: do not monitor the receiver power supply
voltage but use an external sensor instead. This is useful when
the receiver is powered by an ESC. Connect the external sensor
directly to the main battery.
• Low voltage: set the minimum voltage when the battery is
almost empty (picture
).
• Alarm voltage: set the voltage under which an audible alarm
rings and the receiver battery icon in the top tray blinks.
• High voltage: set the maximum voltage when the battery is
full.
RX setup
Selecting a transmission system:
• select the correct standard
• the correct transmission standard compatible with the receiver
is selected here
• factory setting “AFHDS 2A”
