49
//
GB
4. The red LED on the receiver will light up and confirm the receipt
of a correct signal.
5. If the error rate is less than 5%, the receiver signal is stable.
6. The RC system can now be used.
To switch off, proceed in reverse order. Switch off the receiver first,
then the transmitter.
Model name
Receiver signal
Throttle curve
ABS
Engine cut
Throttle idle
Boat mode
TH trim state
Help icon
Receiver sensor´s state
Break mixing
Mixes
Race timer
Turn sound
Steering channel state
Throttle channel state
3 channel state
4 channel state
Settings icon
Setting trim state
Transmitter battery
Receiver battery
POWERING ON THE RC SYSTEM
1. Connect all the components as described in the operating
instructions.
2. Switch on the transmitter at the power button.
3. Connect the RX battery to the receiver or the driving battery to
the ESC.
Power switch
On/Off
MENU NAVIGATION
Main screen
feedback
LED
