![background image](http://html1.mh-extra.com/html/carrier/pro-dialog-plus-50az/pro-dialog-plus-50az_installation-operation-and-maintenance-instructions_2562418014.webp)
14
4.3.6 - Description of the Temperatures menu
TEMPERATURES MENU [2]
ITEM
FORMAT
UNITS
COMMENTS
0
±
nn.n
°
C
Room temperature sensor 1
1
±
nn.n
°
C
Supply air temperature
2
±
nn.n
°
C
Outdoor temperature
3
±
nn.n
°
C
Saturated discharge temperature, circuit A
4
±
nn.n
°
C
Saturated suction temperature, circuit A
5 [1]
±
nn.n
°
C
Saturated discharge temperature, circuit B
6 [1]
±
nn.n
°
C
Saturated suction temperature, circuit B
7 [1]
±
nn.n
°
C
Defrost temperature, circuit A
8 [1]
±
nn.n
°
C
Defrost temperature, circuit B
9 [1]
±
nn.n
°
C
Offset value - sensor T-56
10 [1]
±
nn.n
°
C
Leaving water temperature, optional heating
coil
11 [1]
±
nn.n
°
C
Room temperature sensor 2
Legend
1
This item is displayed in certain unit configurations only
2
Access to this menu is read-only.
4.3.7 - Description of the Pressures menu
PRESSURES MENU [2]
ITEM
FORMAT
UNITS
COMMENTS
0
nnnn
kPa
Discharge pressure, circuit A.
Relative pressure.
1
nnn
kPa
Suction pressure, circuit A.
Relative pressure.
2 [1]
nnnn
kPa
Discharge pressure, circuit B.
Relative pressure.
3 [1]
nnn
kPa
Suction pressure, circuit B.
Relative pressure.
Legend
1
This item is displayed in certain unit configurations only.
2
Access to this menu is read-only
4.3.8 - Description of the Setpoints menu
SETPOINTS MENU [2]
ITEM
FORMAT UNITS
RANGE
COMMENTS
0
nn.n
°
C
10 - 32.2
Room temperature setpoint - occupied mode
1
nn.n
°
C
1.1 - 16.7
Room dead band setpoint - occupied mode
2
nn.n
°
C
10 - 32.2
Room temperature setpoint - unoccupied mode
3
nn.n
°
C
1.1 - 38.9
Room dead band setpoint - unoccupied mode
4 [1]
nn.n
°
C
1.7 - 15
Frost protection setpoint
5 [1]
nn.n
°
C
4.4 - 60
Cooling mode - outside temperature for zero offset*
6 [1]
nnn
°
C
4.4 - 60
Cooling mode - outside temperature for maximum offset*
7 [1]
n
°
C
0 - 16.7
Cooling mode - maximum offset value*
8 [1]
n
%
10 - 80
Humidity setpoint - occupied mode
9 [1]
nnn
%
10 - 50
Humidity dead band - occupied mode
10 [1]
nnn
%
10 - 80
Humidity setpoint - unoccupied mode
11 [1]
nn
%
10 - 50
Humidity dead band - unoccupied mode
12 [1]
nn
°
C
7.2 - 15
Purge - minimum outside temperature
13 [1]
nn.n
°
C
15.6 - 43.3
Purge - maximum outside temperature
14 [1]
nn
minutes
1 - 5
Purge duration
15 [1]
nnnnn
ppm
50 - 10000
Air quality setpoint
1
This item is displayed in certain unit configurations only.
2
All points contained in this table can be modified.
*
These parameters are only accessible when offset based on OAT or delta T has been selected in the User Configuration 1 menu. See section 4.3.11.3 & 5.5.2.
4.3.9 - Description of the Inputs menu
INPUTS MENU [2]
ITEM
FORMAT
UNITS
COMMENTS
0
oPEn/CLoS
-
Indoor fan on/off status
1
oPEn/CloS
-
Filter status clean/dirty
2
oPEn/CloS
-
Smoke detector status
3
b1b2
-
Pressure switch protection status
b1 = status pressure switch A
b2 = status pressure switch B
4
-
Not used
5 [1]
oPEn/CloS
-
On/off contact status
6 [1]
oPEn/CloS
-
Demand limit contact status
7 [1]
oPEn/CloS
-
Status setpoint selection contact 1
8 [1]
oPEn/CloS
-
Status setpoint selection contact 2
9 [1]
nnn
%
Relative humidity level
10 [1]
nnnn
ppm
Air quality
11 [1]
oPEn/CloS
-
Outdoor enthalpy contact. Closed = high enthalpy, economiser in minimum position
12 [1]
oPEn/CloS
-
Thermostat contact G, on/off
13 [1]
oPEn/CloS
-
Thermostat contact Y1_W2
14 [1]
oPEn/CloS
-
Thermostat contact Y_Y2
15 [1]
oPEn/CloS
-
Thermostat contact W_W1
16 [1]
oPEn/CloS
-
Thermostat contact O_W2
1
This item is displayed in certain unit configurations only
2
Access to this menu is read-only.