Carrier NDK33BN0KB, Operation & Service Manual

Page: 76 / 270

62-61753-21 3-28
3.19 OPTIONS
3.19.1 IntelliSet
COOL DEFROST ALARM START-STOP
E R U T A R E P M E T X O B T N I O P T E S
ALARM LIST
SELECT MANUAL
DEFROST
S U O U N I T N O C T A E H
E V I T C A S E L P P A
START--STOP/
CONTINUOUS
DURING START UP
Observe the MessageCenter during the Power--Up process. If the unit is equipped with IntelliSet, the name
of the active or modified IntelliSet will be displayed for approximately 10 seconds before the engine starts.
DURING OPERATION
Press the SELECT key to view current IntelliSet. You will be prompted to press either the “=” key or the UP
or DOWN ARROW Key to scroll through list of IntelliSets. The current IntelliSet will have either the word
ACTIVE or MODIFIED after it. MODIFIED indicates that one or more of the IntelliSet settings (other than
set point) have been changed. To change MODIFIED to ACTIVE, press ”=” key while the IntelliSet is dis-
played in the MessageCenter.
+34.5
°
F
+34.0
The LogiCOLD Microprocessor offers over 48 parame-
ters that may be set depending on the product being
carried. IntelliSet allows the owner to pre-program
specific product settings into the microprocessor and
give the settings a name. The operator may then call
up these settings by simply selecting the IntelliSet
name.
For example: Apples may require continuous operation
at 1.7°C (35°F) with a defrost every 3 hours while a
load of cheese may require the same operation with
set points ranging from 1.7°C to 5.6°C (35°F to 42°F)
and a load of ice cream requires Start-Stop operation
at -30°C (-22°F) with defrost at 12 hour intervals. The
settings required for each product may be entered into
the microprocessor and then locked so they cannot be
changed. In the case of the cheese, the range of set
points may be locked, leaving the operator the ability
to change the set point within the locked range.
When a load of apples is going to be picked up, the
operator simply selects "APPLES" from the IntelliSet
menu; for cheese, "CHEESE" is selected; for ice cream, "ICE CREAM" is selected. With each selection,
the microprocessor automatically re-programs the
settings to provide the best temperature control, fuel
economy, and performance for that particular product.
NOTE
IntelliSet #31 is pre-programmed as
"IntelliSleep" which allows Sleep Mode (refer
to Section 3.8) to be entered by simply chang-
ing to that IntelliSet.
The ONLY way to exit from IntelliSleep is to
select a different IntelliSet.
NOTE
The above settings are examples of possible
settings. Factory IntelliSets are available from
the Information Website through your author-
ized Truck / Trailer dealer.