![background image](http://html1.mh-extra.com/html/carrier/ndk33bn0kb/ndk33bn0kb_operation-and-service-manual_2563853121.webp)
62-61753-21
7-5
Alarm
NO.
Steps
ALARM / CAUSE
CORRECTIVE ACTION
12
HIGH COOLANT TEMPERATURE
TRIGGER-ON:
"Check Engine Coolant Sensor" alarm not active (if so, refer to alarm 129 first) and:
Ambient temp below 48.9°C (120°F) and engine coolant temperature rises above 110°C (230°F)
or
Ambient temp above 48.9°C (120°F) and engine coolant temperature rises above 116°C (241°F)
or
Ambient temperatures equal to or below 48.9°C (120°F) and engine coolant temperature is between
110°C and 116°C (230°F and 241°F) for more than 5 minutes
UNIT CONTROL:
Engine operation: Shutdown and alarm.
Standby operation: Will not activate in standby.
RESET CONDITION: Auto Reset if the engine coolant temp falls below 100°C (212°F), or alarm may
be manually reset via keypad or by turning the unit off, then back on again.
NOTE: Follow the steps below until a problem is found. Once a repair or correction has been made, the active
alarm should clear itself (refer to reset condition above). Operate the unit through the appropriate modes to see if
any active alarm occurs. Continue with the steps below as necessary.
1
Check Coolant Level
a. Check coolant level in overflow
bottle.
Level must be in the normal range.
WARNING
Do not remove the cap
from a hot radiator; if the
cap must be removed, do
so very slowly in order to
release the pressure with-
out spray.
b. Check coolant level in radiator
Level must be at the top of the radiator fill tube.
c.
Inspect connecting tube between
overflow bottle and radiator.
Connections must be airtight. No leakage or holes in
tube.
2
Check Freeze Point Of Coolant
a. Use Coolant Tester to check con-
centration of anti-freeze mixture.
Must be between 40% to 60% Ethylene Glycol to water
mixture.
3
Check Airflow Through Radiator / Condenser Coil
a. Inspect condenser / radiator fins.
Fins must be straight. 90% or more of the coil surface
must be undamaged. No "dead" air spaces. Condenser
/ Radiator coil must be clean (refer to Section 8.6.3).
b. Check airflow.
Even airflow through the entire coil. No "dead" spots.
c. Check condenser fan rotation /
operation.
Fans should operate correctly. Air should be drawn in
through the grill, and directed into the engine com-
partment.
4
Check Water Pump Belt
a. Check engine water pump belt.
No Glazing, cracking or slipping.
Additional steps on the next page.
Summary of Contents for NDK33BN0KB
