![background image](http://html.mh-extra.com/html/carrier/connect-33connectstat43fx/connect-33connectstat43fx_installation-manual_2564065023.webp)
Getting to know the user interface
Carrier Connect™ Wi
-Fi Thermostat 33CONNECTSTAT43FX
CARRIER CORPORATION ©2021
Installation Guide
All rights reserved
19
Changing the fan
The fan's current state is displayed on the home screen above the
MENU
button.
You can change the fan setting by pressing
MENU
and then the current fan setting is displays.
To change the fan setting, press
SELECT
and then use the up and down arrows to toggle the fan setting between
AUTO
and
ON
and then press
SAVE
.
•
ON
specifies continuous fan that is always running.
•
AUTO
specifies that the fan only runs while actively heating or cooling.
When the fan setting differs from the program schedule setting for the current period, the banner displays
FAN
OVERRIDE
. The override remains active for the rest of the current program schedule.
Changing the mode
You can change the mode from the home screen by pressing the
MODE
button.
Changing from one mode to another does not affect the thermostat's operation until the mode selection has
remained constant for at least 5 seconds. Changing from one mode to another (e.g.
HEAT
mode to
COOL
mode)
requires the thermostat to first satisfy any
MINIMUM ON
timer requirements and then restarts the
MINIMUM OFF
timer that must expire before equipment is turned on in the new mode.
Going from any heating or cooling mode to
OFF
mode immediately shuts off any equipment that is active (after the
5-second mode button). See
Timers
(page 50) for additional descriptions of the
MINIMUM OFF
timer and the
MINIMUM ON
timer.
NOTE
Some modes may not be available, based on the
INDOOR EQUIPMENT TYPE
or the
COMPRESSOR TYPE
selections made in Installer Settings.
Summary of Contents for Connect 33CONNECTSTAT43FX
Page 4: ......
Page 68: ......
Page 69: ......
Page 70: ...Carrier 2021 Catalog No 11 808 872 01 12 3 2021 ...