INSTALLATION MANUAL ATB100 WI-FI THERMOSTAT
1
2
ENGLISH
REVISION 1.7
WARNING
•
Read the instructions before installing and using this product.
•
The product should not be used with different functions other than those described below.
•
Warning: before proceeding with the installation, turn off the power supply from the system.
•
For the use of the product it is necessary to have a WIFI network.
•
For the use of the product it is necessary to have a smartphone or Tablet with internet connection.
•
Install the thermostat Campini at a height of 1.5 meters above the ground in a suitable position to correctly
detect the ambient temperature, possibly on an internal wall, avoiding the installation near doors, windows,
curtains or near heat sources.
•
Install the router Campini within the range of domestic WIFI network.
•
The maximum reception distance between Campini Router and Campini Thermostat in open air is about 100
meters. Obstacles between Router and Thermostat, such as walls or shielding materials, reduce the
reception distance.
SHIPPING CONTENTS
1 Campini thermostat
1 Campini Router
3 AAA batteries 1.5V
INSTALLATION
The list below shows step by step how to install and activate the Campini thermostat and Router:
1)
Caution:
remove the electric current from the system.
2) Remove the old thermostat.
3) Locate the control cables.
If the old thermostat is equipped with 2 wires, then those will be the control cables to be connected to the Campini
Thermostat
If the old thermostat has 4 wires, it will be sufficient to recognize the control cables from the power ones. While the
control cables will be used to install the Campini Thermostat, the power cables must be isolated as they will not be
used.
4) Separate the Campini Thermostat from the relative plate. To do this, simply insert a suitable tool into the slot on
the right side of the Campini Thermostat and exert a slight pressure until the front of the device separates from the
plate.
5) Attach the Campini thermostat plate to the wall.
