Communicating through the Local Access port with a USB Link
Carrier® ChillerVu™
(OPN-PSM-MPCXPE)
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation and Start-up Guide
54
All rights reserved
USB Link
Connect to
Local Access port
12 ft
Connect to
USB port
7 3/4 in.
NOTE
If using a USB isolator, plug the isolator into your computer's USB port, and then plug the USB Link
cable into the isolator.
3
To change a router's IP address, subnet mask, or default gateway, set its
IP Address
DIP switch to
Assigned
.
4
Start PuTTY.
5
Under
Category
>
Connection
, select
Serial
.
6
Under
Options controlling local serial lines
, enter the following settings:
Field
Value
Serial line to connect to
Replace X with the computer's port number that the USB Link cable
is connected to.
NOTE
To find the port number, select
Start
>
Control Panel
>
System
>
Device Manager
>
Ports (Com & LPT)
. The COM port
number is beside
Silicon Labs CP210x USB to UART Bridge
.
Speed (baud)
115200
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
None
7
Click
Open
. A window similar to the one below appears.