Installing an MPC Open XPIO expander
Carrier® ChillerVu™
(OPN-PSM-MPCXPE)
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation and Start-up Guide
13
All rights reserved
You can mount the expander in one of the following locations:
•
On top of a Carrier® ChillerVu™, using the two allen cap screws provided. Connect
Gnd
to
Gnd
,
Xnet-
to
Xnet-
,
Xnet+
to
Xnet+
.
•
Beside the Carrier® ChillerVu™, by screwing the expander into an enclosed panel using the mounting slots on
the coverplate. Leave about 2 in. (5 cm) on each side of the expander for wiring. Mounting hole dimensions
1.5" from the left (width) by 10.2" (height). Connect
Gnd
to
Gnd
,
Xnet-
to
Xnet-
,
Xnet+
to
Xnet+
. You can
mount the expander up to 100 ft away from the controller.