Carrier CDN-10Q7, Owner'S Manual

Page: 19 / 98

OPERATING THE UNIT OPERATING THE UNIT
17
Removing the collected water
2. Continuous draining
● Water can be automatically emptied into a floor drain by
attaching the unit with a water hose (not included).
● Remove the rubber plug from the back drain hose outlet.
Attach a drain hose(ID=13.5mm) and lead it to the floor drain
or a suitable drainage facility(see Fig.8 and Fig.9).
● Make sure the hose is secure so there are no leaks.
● Direct the hose toward the drain,making sure that there are no
kinks that will stop the warter flowing.
● Place the end of the hose into the drain and make sure the
end of the hose is level or down to let the water flow smoothly.
Donever let it up.
● Make sure the water hose is lower than the drain hose outlet.
● Select the desired humidity setting and fan speed on the unit
for continuous draining to start.
Remove the cover
Fig. 8
Drain hose
Fig. 9
NOTE: When the continuous drain feature is not being
used,remove the drain hose from the outlet and attach the rubber
plug back to the drain outlet .