CARLO GAVAZZI WM5-96 - PROGRAMMING, Instruction Manual

Page: 27 / 55

25
WM5-96 Instruction Manual
Programming WM5 96
FUNCTION (6) : set its OR or AND logic. Choose FUNCTION by means
of the “ ” keys and confirm with “S”. Afterwards select by the
“ ” keys the logic function to be coupled to the OR (6b) or AND
(6b) alarm, then confirm with “S”. See details in “Logic and alarm
parameters”. Proceed, if necessary, with the configuration of the other
alarms (up to a maximum of 16 alarms).
To exit the menu “digital outputs” keep the “S” key pressed for at least 2
seconds.
**********AALLAARRMMSS MMEENNUU**********
AALLAARRMM:: 0011
DDEELLAAYY OOFFFF:: 00 ss
DELAY ON
DELAY OFF
FUNCTION
6
OR
AND
Logic and alarm parameters
SET 1
SET 2
UP alarm
DOWN alarm In-window alarm
Alarm is on when the value
is between
SET 1 and SET 2
Ext. window alarm with
disabling at power on
Alarm is on when value
exceeds SET 1
or goes below SET 2
Alarm function enabling
Example of AND/OR logic alarm:
A: AND B: AND C: AND
A: OR
B: OR
C: OR
- Enable.
- Variable
- Type
- Latch
- Disable - Set 1
- Set 2
- OUT
- Delay on. Delay off.
- Function (and/or)
AND OR
8 8
A: OR
B: OR
C: OR
A: OR
B: OR
C: OR
A: AND B: AND C: AND
A: AND B: AND
C: AND
Each symbol includes all
the settings described in
the “alarm” paragraph and
listed on the right:
6b
00000 s
min
0 0000 s
max 255 00 s
6a
DELAY OFF ?
A, B, C... up to 16 locks to
control parameters.
SET 1
SET 2
SET 1
SET 2
SET 1
SET 2
A: OR
B: OR
C: AND
D: AND
OR+AND
A: OR
B: OR
C: AND D: AND
A: OR
B: OR
C: AND
D: AND