CARLO GAVAZZI WM5-96 - PROGRAMMING, Instruction Manual

Page: 19 / 55

Programming WM5 96
PERIODS (7) : set the periods to which the tariffs are to be coupled. It’s
possible to divide each day into up to 24 periods. Up to 100 lines of
period selection can be entered. Select PERIODS by means of the
“
” keys and confirm with the “S” key: a table (8) will be dis-
played which will be empty at the beginning and where the various
programmed periods are to be entered. To set the START TIME of the
period
(9), press the “S” key; then, by means of the “ ” keys,
select the time from 00 (00 AM) to 23 (11 PM); press “S” to confirm the
selected time and go to the setting of the “END TIME”: select the
desired time by means of the “
” keys, then press “S”.
Afterwards, set the START DATE of the period by means of the “
” keys and confirm with the “S” key, then set the END DATE of the
period by means of the “S” keys and confirm with “S”. Once the time
data have been set, the instrument will display a window
(10) from
which the period type can be selected, that is either WORKING, HOL-
IDAY or ALL (the ALL selection will not make any difference between
WORKING day and HOLIDAY, that is the default TARIFF will be
applied): select the desired mode by means of the “
” keys and
confirm with “S”. As last setting, choose the TARIFF (11) to be coupled
to the period, use the “ ” keys to select the desired tariff from 1
to 12 and confirm with the “S” key (up to 12 tariff if the management
is carried out by means of internal clock, up to 4 tariffs if the manage-
ment is carried out by means of the digital inputs).
A new line
(12) relevant to the period which has just been programmed
will be added to the table: it’ll be possible to add up to 99 further lines.
The following options
(13) are also possible:
INSERT: enter a new line (new period); follow the instructions given
from step (9) to step (11) .
MODIFY: modify an existing period. Select the period to be modified
by means of the “ ” keys, press the “S” key to display the rele-
vant window (13), then choose MODIFY by means of the “ ” keys
and confirm the choice with the “S” key. Afterwards follow the setting
procedure as described from step
(9) to step (11) .
DELETE: delete an existing period. Select the period to delete with the
“ ” keys, press the “S” key to display the relevant window (13)
then choose DELETE by means of the “ ” keys and confirm with
the “S” key. Before deleting the period, the instrument displays the fol-
lowing message: PAY ATTENTION, CURRENT LINE WILL BE DELET-
ED!!!! WILL YOU CONTINUE? Choose YES to execute the command
or NO to cancel the deleting.
DELETE ALL: delete all the existing periods. Press the “S” key to dis-
play the relevant window (13) , then choose DELETE ALL by means of
the “ ” and confirm with the “S” key. Before deleting all the peri-
ods, the instrument displays the following message: PAY ATTENTION,
ALL LINES WILL BE DELETED!!! WILL YOU CONTINUE? Choose YES
to execute the command or NO to cancel the deleting.
17
WM5-96 Instruction Manual
TTIIMMEE PPEERRIIOODD SSEELLEECCTTIIOONN
WEEK TYPE
PERIODS
DEFAULT TARIFF
> 2s
Go back
7
time day
W H T
-- -- --/-- --/-- --
8
START TIME ? 00
time day
W H T
-- -- --/-- --/-- --
9
END TIME ? 01
START TIME ?
00/00
END TIME ? 00/00
time day
W H T
-- -- --/-- --/-- --
WORKING
HOLIDAY
ALL
time day
W H T
-- -- --/-- --/-- --
1
10
11
> 2s
Go back
> 2s
Go back
time day
W H T
00 01 01/01 01/01 01
line : 001
time day
W H T
00 01 01/01 01/01 01
line : 001
INSERT
MODIFY
DELETE
DELETE ALL
12
13
> 2s
Go back
> 2s
Go back
123...
123...
123...
123...
123...
> 2s
Go back
> 2s
Go back
TARIFF ?