CARLO GAVAZZI WM5-96 - PROGRAMMING, Instruction Manual

Page: 35 / 55

33
WM5-96 Instruction Manual
Programming WM5 96
This function allows the user to set the Ethernet port. Choose the
ETHERNET PORT function
(1) by means of the “ ” keys and con-
firm with “S”.
IP ADDRESS (2) : set the IP parameters. Select IP ADDRESS by
means of the “ ” keys and confirm with “S”. Then select IP (IP
address) or MASK (netmask) by means of the “ ” keys and con-
firm with “S”. Set the value (2a) by means of the “ ” keys, where
the “ ” key increases the value and the “ ” key switches to the fol-
lowing number. Confirm with “S”.
GATEWAY (2) : set the IP gateway parameters. Select GATEWAY by
means of the “ ” keys and confirm with “S”. Set the value (2b) by
means of the “ ” keys, where the “ ” key increases the value
and the “ ” key switches to the following number. Confirm with “S”.
MODBUS TCP/IP (2) : to modify the default port of the Ethernet port
(502), select MODBUS TCP/IP by means of the “ ” keys and con-
firm with “S”. Set the value (2b) , from 1 to 65535, by means of the
“ ” keys and confirm with “S”.
To exit the various menus and submenus, keep the “S” key pressed
for at least 2 seconds.
Thanks to the digital filter, it’s possible to stabilize the measurements
which are too instable when displaying the relevant values.
By means of the “
” keys, select FILTER and confirm with “S”. Select
the function to be set from the various submenus with the “ ” keys
and confirm with “S”:
RANGE (3) : set the operating range of the digital filter. The value is
expressed as a %. By means of the “ ” keys select RANGE and
confirm with “S”, then set the value as a percentage by means of the
“
” keys and confirm the value with the “S” key.
COEFFICIENT (4) : set the filtering coefficient of the instantaneous
measures. By increasing the value, also the stability and the settling
time of the measures are increased. Select COEFFICIENT by means of
the “
” keys and confirm with the “S” key, then set the value by
means of the “ ” keys and confirm the new value with the “S” key.
Ethernet Port
Digital filter
**********MMAAIINN MMEENNUU**********
RREEVV.. 11..44..22..66 ((AAVV55))
EVENT SELEC.
ANALOG OUTPUTS
SERIAL OUTPUT
FILTER
**********MMAAIINN MMEENNUU**********
RANGE
COEFFICIENT
1
2
> 2s
> 2s
Measure
Go back
RANGE 1 ,000%
min 0.100%
max 100.0%
123...
4
COEFFICIENT
4,000%
min 1 .100%
max
255 .0%
123...
Confirm
Confirm
3
IP ADDRESS
GATEWAY
**********MMAAIINN MMEENNUU**********
RREEVV.. 11..44..22..66 ((AAVV55))
EVENTS SELEC.
ANALOG OUTPUTS
SERIAL OUTPUT
ETHERNET PORT
********EETTHHEERRNNEETT MMEENNUU********
1
2
> 2s
> 2s
Measure
Go back
PORT ?
5 02 00.
min
1 00000
max
65535 0
2a
2c
123...
IP
MASK
255. 255. 255. 0
192 . 168. 2. 122
123...
> 2s
Go back
MODBUS TCP/IP
GW IP
00 0 . 00 0. 0. 00 0
123...
> 2s
Go back
2b