CARLO GAVAZZI WM5-96 - PROGRAMMING, Instruction Manual

Page: 30 / 55

28
WM5-96 Instruction Manual
Programming WM5 96
This sub-menu allows the user to select which events are to be
stamped. Choose the function EVENTS SELEC.
(1) by means of the
“ ” keys and confirm with “S”. Afterwards proceed as follows:
ALARMS (2) : select if the alarm events are to be stamped. Choose
alarms by means of the “ ” keys and confirm with “S”, then ,
alarm by alarm by means of the “ ” keys, decide whether the
stamping is to be enabled “ON” or disabled “OFF”, by pressing the
“S” key.
MIN, MAX, DMD MAX (2) : select whether to store the minimum, max-
imum and dmd values for each variable measured by the instrument.
Select the minimum, maximum or dmd maximum by means of the “
” keys and confirm with “S”, then select, variable by variable if the
storing is to be carried out (2b) , choose by means of the “ ” keys
the desired variable and decide whether to enable the storing “ON” or
disable the storing “OFF” by pressing the “S” key.
DIG. INPUTS (2) : select whether to store the status variables of the
digital inputs. Choose DIG. INPUTS by means of the “ ” keys and
confirm with “S”, then select one by one the digital inputs of which the
storing is required
(2c) , choose by means of the “ ” keys the type
of digital inputs (remote, synchronism, tariff), then confirm whether to
enable the storing “ON” or disable it “OFF” by pressing the “S” key.
DIG. OUTPUTS (3) : select whether to store the status variations of the
digital outputs or not. Select the digital outputs by means of the “ ”
keys and confirm with “S”, then confirm whether to enable the storing
“ON” or disable it “OFF” by pressing the “S” key.
RESET (3) : select whether the resets which have been carried out are
to be stored or not. Choose RESET by means of the “ ” keys,
then select which resets are to be stored (3b) , by means of the “ ”
keys and select whether to enable the storing “ON” or disable it “OFF”
by pressing the “S” key.
Events selection
************MMAAIINN MMEENNUU************
RREEVV.. 11..44..22..66 ((AAVV55))
DIGITAL INPUTS
DIGITAL OUTPUTS
ALARMS
EVENTS SELEC.
EEVVEENNTTSS SSEELLEECCTTIIOONN MMEENNUU
1
2
> 2s
> 2s
Measure
Measure
ALARMS
MIN
MAX
DMD MAX
DIG. INPUTS
********AALLAARRMM EEVVEENNTTSS********
2a
> 2s
Go back
ALARM 01 (OFF)
ALARM 02 (ON)
ALARM 03 (ON)
ALARM 04 (ON)
ALARM 05 (ON)
V1 (OFF)
v2 (ON)
V3 (ON)
VL (ON)
V12 (ON)
2b
REMOTE (OFF)
SYNC (ON)
TARIFF (ON)
> 2s
Go back
> 2s
Go back
2c
EEVVEENNTTSS SSEELLEECCTTIIOONN MMEENNUU
> 2s
Go back
MAX
DMD MAX
DIG. INPUTS
DIG. OUTPUTS
RESET
3
REMOTE (OFF)
TOT. PAR. (OFF)
TOTAL + (ON)
TOTAL - (ON)
P (ON)
PARTIAL - (ON)
P (OFF)
PARTIAL - (ON)
MIN - MAX (ON)
DMD MAX (ON)
LATCH (ON)
> 2s
Go back
> 2s
Go back
3b
3a
TOTALIZERS (ON)