Error Codes
The following is a complete list of error codes. Some of
these codes may not apply depending on the specific con-
trol system configuration. The corrective actions listed in
the table are discussed in more detail later in this section
and also included in the "HELP" screens located on the
operator interface.
Example Error Code: XXXX
1st Digit:
2 = GUN Alert
4 = DISK Error
9 = CHANNEL Fault
A = GUN Fault
B = SYSTEM Alert or Fault
2nd and 3rd Digit:
No specific meaning
4th Digit:
- If a GUN error, the number indicates which
GUN (1-8)
- If a CHANNEL error, the number indicates
which CHANNEL (1-8)
MAINTENANCE
Displayed Text
Fault Cause
Corrective Action
TROUBLESHOOTING GUIDE
ERROR CODES
Code
Pot-Life Timer
Expired -
GUN #<>
Pot-Life Timer has expired for
GUN indicated.
Last digit indicates
CHANNEL #
.
Verify the following:
1. Correct value for Pot-Life time.
2. Correct value for Mixed Volume.
If the above values are correct, then fluid must be
flushed from the GUN immediately.
2021
2022
2023
2024
2025
2026
2027
2028
9011
9012
9013
9014
9015
9016
9017
9018
Out Of Tolerance -
CHANNEL #<>
The indicated CHANNEL is outside it’s
maximum tolerance limit as specified
by the FLOW TOLERANCE parameter.
Last digit indicates
CHANNEL #
.
Check the following:
1. Kp, Ki, and Kd gains set wrong which may
cause unstable fluid regulation.
2. Running the wrong JOB # which may include
the wrong Kp, Ki, and Kd values.
2061
2062
2063
2064
2065
2066
2067
2068
Gun Not Ready -
GUN #<>
Indicated GUN # is not ready. This means
that the GUN # has been given a RUN
command without being enabled, or the
GUN has faulted.
Last digit indicates
CHANNEL #
.
Verify that the GUN is enabled and not faulted. Each
GUN must have the Ext. Fault/Enable Input active,
or the Global Gun Enable active.
(Continued On Next Page)
LN-9400-00-R11 (08/2018)
58 / 96
www.carlisleft.com
MAINTENANCE