Carl Valentin Vita II 103/8 T, Quick Reference Manual

Page: 102 / 172

Vita II
102 English
Key:
Synchronization at
switching on Off: The synchronization is disabled, i.e. the measuring and label feed have to be released
manually.
Measure: After switching on the printer, the loaded label is automatically measured.
Label feed: After switching on the printer the label is synchronised to the beginning of label.
For this one or multiple labels are advanced.
Key:
CMI length If the print is interrupted in the label, at the printhead this could lead to a small interruption in
the printout, showing a fine white line onto the label. To avoid this, a value for the minimum
backfeed can be set (0
– 1 mm) at which the label material is moved backwards. At the next
print start the free range is overprinted. The setting of CMI length has only an influence at the
selection of backfeed mode 'optimised backfeed'.
Network
Keys: , , , ,
For more information, please see the separate manual.
Password
Keys: , , , , ,
Operation
Password Entering a 4-digit numeric password.
Key:
Protection configuration Printer settings can be changed (contrast, speed, operating mode, ...). The password
protection prevents modifications at the printer settings.
Key:
Protection favorites The password protection prevents the access to the favorites.
Key:
Protection memory card
With the functions of the memory card, labels can be stored, loaded, etc. The password
protection has to decide if no access or only readable acces on CF card is allowed.
No protection: No password protection
Userview only: Only reading access
Protected: Access blocked
Key:
Protection printing In case the printer is connected to a PC, it can be useful, that the user is not able to produce a
print manually. So the password protection prevents that prints can be produced manually.
Network
Password Entering a 15-digit password. The password can consists of alphanumeric and special
characters.
Key:
Protection HTTP The communication by HTTP can be avoided.
Key:
Protection Telnet The settings of the Telnet service cannot be changed.