Cargo 211091, User Manual

Page: 13 / 78

24
211091
24
Vedpak 113_Version 2_201109
Circuit Wiggle & Flex Test
At times it’s necessary to check for intermittent
connections problems. The circuit wiggle test allows you
to wiggle, twist, pull, push and flex wires or connectors
and observe a circuit change. The transmitter monitors the
condition of the circuit and alerts you to a change.
For instance, if you are injecting an open circuit signal into
an open circuit and you wiggle the wires, it might make
contact inside of a broken wire or a lose connector. The
transmitter will sound off at the instant the open circuit
makes contact with a connection or ground. At this point
you can keep flexing and wiggling the wire to locate the
problem.
If you are injecting an isolated Grounded Circuit and the
wires you wiggle causes it to lose contact, it will instantly
sound-off, alerting you to the fact that the circuit has lost
its connetion to ground.
As the transmitter is sounding, you can press the "Tone
On/Off" button and the tone will toggle off. When you
toggle it off, as it is alerting you to an open circuit, it now
silently monitors the open circuit until it makes contact
with ground again.
Wiggle, flex and pull the wire
to test for intermittent contacts
Intermittent connectors
Wiggle, flex and pull the wire
to test for intermittent contacts
www.hc-cargo.com