Carel HeaterSteam 4 UR002, User Manual

Page: 8 / 92

8
ENG
“heaterSteam” +0300087EN - rel. 1.4 - 22.01.2021
1.6 Removing the front panel
Models UR002…UR013:
1
2
3
4
Fig. 1.e
1.
turn the oval plate with the CAREL logo until the ground screw head
can be seen;
2. loosen the screw with a screwdriver;
3. grab the sides of the panel, lift it about 20 mm (0.79 in), and detach it
from the protruding edges of the humidifi er;
4.
remove the panel by pulling it forward;
5. remove the protective fi lm.
Models UR020...UR080:
1
3
2
4
Fig. 1.f
1.
remove the screws on the top of the humidifi er using a screwdriver;
2.
grab the panel by lifting it from the top about 20 mm (0.79 in);
3. remove the panel by pulling it forward;
4.
remove the protective fi lm (on all external surfaces of the humidifi er).
1.7 Mounting the front panel
Models UR002…UR013:
2
1
3
4
Fig. 1.g
1.
turn the red oval plate with the CAREL logo so that the fastening hole
below is visible;
2. slide the panel on the frame (keeping it slightly raised and tilted) until
it stops on the rear edges;
3.
fasten the ground screw using a screwdriver, ensuring its tightening;
4. turn the red oval plate with the CAREL logo so that the fastening hole
below is no longer visible;
Models UR020...UR080:
2
Fig. 1.h
1.
slide the panel on the base, keeping it slightly tilted;
2. put it in vertical position and tighten the screws on the top cover
with a screwdriver.
Caution: in models UR020...UR080 open the electrical
compartment of the humidifi er using the slotted lock.
Fig. 1.i