Carel HeaterSteam 4 UR002, User Manual

Page: 46 / 92

46
ENG
“heaterSteam” +0300087EN - rel. 1.4 - 22.01.2021
11.2 Table of supervisor variables
The variables shown in the lists below are only a set of all the internal variables on the heaterSteam humidifi er.
DO NOT CONFIGURE ANY VARIABLES THAT ARE NOT SHOWN IN THE TABLES TO AVOID RISKING INCORRECT HUMIDIFIER OPERATION.
11.2.1 T a bl e of Ca r e l v a ri a bl e s
Below are the variables used by the Carel protocol.
Integer variables
Address Variable Name Description Default Min Max UoM Direction
1 SV_SWVer Software version Read
2 SV_OSVer OS version Read
3 UnitModel Model version Read
4 Conductivity Inlet water conductivity reading 20 1509 [uS/cm] Read
5 WirelessPrbInfo_1.BattLev Wireless probe reading 1: battery level
(0: Empty 1: 25% 2: 50% 3: 75% 4: 100%) Read
6 WirelessPrbInfo_1.RadioSignalLev Wireless probe reading 1: radio signal level
(0: Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good
31-100: Excellent) Read
7 WirelessPrbInfo_2.BattLev Wireless probe reading 2: battery level
(0: Empty 1: 25% 2: 50% 3: 75% 4: 100%) Read
8 WirelessPrbInfo_2.RadioSignalLev Wireless probe reading 2: radio signal level
(0: Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good
31-100: Excellent) Read
9 WirelessPrbInfo_3.BattLev Wireless probe reading 3: battery level
(0: Empty 1: 25% 2: 50% 3: 75% 4: 100%) Read
10 WirelessPrbInfo_3.RadioSignalLev Wireless probe reading 3: radio signal level
(0: Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good
31-100: Excellent) Read
11 WirelessPrbInfo_4.BattLev Wireless probe reading 4: battery level
(0: Empty 1: 25% 2: 50% 3: 75% 4: 100%) Read
12 WirelessPrbInfo_4.RadioSignalLev Wireless probe reading 4: radio signal level
(0: Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good
31-100: Excellent) Read
13 UnitStatus Unit staus ** Read
14 WorkHr Unit life hours [h] Read
15 CylWorkHr Cilinder life hours 0 [h] Read
16 ManMode_msk Start manual mode
(0: Disabled 1: Manual outputs 2: Manual production) 0 0 2 ReadWrite
17 ManSSR_OpT ON time setting for SSR heater power control cycle
in manual mode 0 10000 [ms] ReadWrite
18 ManSSR_ClT OFF time setting for SSR heater power control cycle
in manual mode 0 10000 [ms] ReadWrite
19 RegulationCfg.RegTyp Control mode
(0: External proportional signal 1: External proportio-
nal limit 2: ON / OFF signal 3: Humidity (one
probe) 4: Temperature (one probe) 5: Hu
limit 6: Tempe limit 7: Humidity (two probes)
8: Temperature (two probes)) 3 0 8 ReadWrite
20 ThrshAlrmDT High humidity/temperature alarm delay setting 60 [s] ReadWrite
21 MainPrbCfg.UITyp Main probe type setting
(0: 0..1V 1: 0..10V 2: 2..10V 5: NTC 3: 0..20mA 4: 4..20mA) 1 0 4 ReadWrite
22 LimitPrbCfg.UITyp Limitbe type setting
(0: 0..1V 1: 0..10V 2: 2..10V 3: 0..20mA 4: 4..20mA 5: NTC) 1 0 5 ReadWrite
23 WHardnessMan Water hardness value setting, if manual mode
(0 = 0-10°F; 1 = 10-20°F; 2 = 20-30°F; 3 = 30-40°F;
4 = Demineralised) 0 4 ReadWrite
24 EvapCycleNoThrsh Number of evaporation cycles setting for drain to
dilute if micro-fi lling mode not active (0=AUTO) 0 0 MaxEvapCycleNo ReadWrite
25 FillTScale Additional fi lling time modifi cation setting after
reaching green LED level if micro-fi lling mode not
active 100 20 100 [%] ReadWrite
26 DilDrainTScale Drain time modifi cation setting 100 5 190 [%] ReadWrite
27 Scheduler.SchedDayToSet Scheduler: day of the week to be confi gured
(1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5:
Friday 6: Saturday 7: Sunday) 1 7 ReadWrite
28 SchedDayCfg[0].StartHr Scheduler: band 1 start hours 0 23 [h] ReadWrite
29 SchedDayCfg[0].StartMin Scheduler: band 1 start minutes 0 59 [min] ReadWrite
30 SchedDayCfg[0].WorkMode Scheduler: band 1 operating mode 0 Scheduler.
SchedTBModeUpLim ReadWrite
31 SchedDayCfg[1].StartHr Scheduler: band 2 start hours 0 23 [h] ReadWrite
32 SchedDayCfg[1].StartMin Scheduler: band 2 start minutes 0 59 [min] ReadWrite
33 SchedDayCfg[1].WorkMode Scheduler: band 2 operating mode 0 Scheduler.
SchedTBModeUpLim ReadWrite
34 SchedDayCfg[2].StartHr Scheduler: band 3 start hours 0 23 [h] ReadWrite
35 SchedDayCfg[2].StartMin Scheduler: band 3 start minutes 0 59 [min] ReadWrite
36 SchedDayCfg[2].WorkMode Scheduler: band 3 operating mode 0 Scheduler.
SchedTBModeUpLim ReadWrite
37 SchedDayCfg[3].StartHr Scheduler: band 4 start hours 0 23 [h] ReadWrite
38 SchedDayCfg[3].StartMin Scheduler: band 4 start minutes 0 59 [min] ReadWrite