Carel HeaterSteam 4 UR002, User Manual

Page: 55 / 92

55
ENG
“heaterSteam” +0300087EN - rel. rel. 1.4 - 22.01.2021
11.2.3 T a bl e of B A C n et v a ri a bl e s
The variables used for the BACnet protocol are shown below.
Positive Integer Value
Address Variable name Description Default Min Max UoM Access
0 SV_SWVer Software version Read
1 SV_OSVer OS version Read
2 UnitModel Model version Read
3 Conductivity Inlet water conductivity reading 20 1509 [uS/cm] Read
4 WirelessPrbInfo_1.BattLev Wireless probe 1 reading: battery level (0: Empty 1:
25% 2: 50% 3: 75% 4: 100%) Read
5 WirelessPrbInfo_1.RadioSi-
gnalLev Wireless probe 1 reading: radio signal level (0:
Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good 31-
100: Excellent) Read
6 WirelessPrbInfo_2.BattLev Wireless probe 2 reading: battery level (0: Empty 1:
25% 2: 50% 3: 75% 4: 100%) Read
7 WirelessPrbInfo_2.RadioSi-
gnalLev Wireless probe 2 reading: radio signal level (0:
Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good 31-
100: Excellent) Read
8 WirelessPrbInfo_3.BattLev Wireless probe 3 reading: battery level (0: Empty 1:
25% 2: 50% 3: 75% 4: 100%) Read
9 WirelessPrbInfo_3.RadioSi-
gnalLev Wireless probe 3 reading: radio signal level (0:
Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good 31-
100: Excellent) Read
10 WirelessPrbInfo_4.BattLev Wireless probe 4 reading: battery level (0: Empty 1:
25% 2: 50% 3: 75% 4: 100%) Read
11 WirelessPrbInfo_4.RadioSi-
gnalLev Wireless probe 4 reading: radio signal level (0:
Absent 1-7: Very poor 8 -14: Poor 15 - 30: Good 31-
100: Excellent) Read
12 UnitStatus Unit status ** Read
13 WorkHr Unit lifetime hours [h] Read
14 CylWorkHr Cylinder lifetime hours 0 [h] Read
15 ManMode_msk Start manual mode (0: Disabled 1: Manual outputs 2:
Manual production) 0 0 2 ReadWrite
16 ManSSR_OpT Set ON time for SSR heater power control cycle in
manual mode 0 10000 [ms] ReadWrite
17 ManSSR_ClT Set OFF time for SSR heater power control cycle in
manual mode 0 10000 [ms] ReadWrite
18 RegulationCfg.RegTyp Control mode (0: External proportional signal 1:
External proportional limit 2: ON/OFF signal
3: Humidity (one probe) 4: Temperature (one probe)
5: Hu limit 6: Tempe limit 7: Humidi-
ty (two probes) 8: Temperature (two probes)) 3 0 8 ReadWrite
19 ThrshAlrmDT Set high humidity/temperature alarm threshold 60 [s] ReadWrite
20 MainPrbCfg.UITyp Set main probe type (0: 0-1V; 1: 0-10V; 2: 2-10V; 5:
NTC 3: 0-20mA; 4: 4-20mA) 1 0 4 ReadWrite
21 LimitPrbCfg.UITyp Set limit probe type (0: 0-1V; 1: 0-10V; 2: 2-10V; 3:
0-20mA; 4: 4-20mA; 5: NTC) 1 0 5 ReadWrite
22 WHardnessMan Set water hardness value, if manual mode (0 =
0-10°F; 1 = 10-20°F; 2 = 20-30°F; 3 = 30-40°F; 4 =
Demineralised) 0 4 ReadWrite
23 EvapCycleNoThrsh Set number of evaporation cycles for drain to dilute
if micro-fi lling mode not active (0=AUTO) 0 0 MaxEvapCycleNo ReadWrite
24 FillTScale Set additional fi lling time modifi cation after
reaching green LED level if micro-fi lling mode not
active 100 20 100 [%] ReadWrite
25 DilDrainTScale Set drain time modifi cation 100 5 190 [%] ReadWrite
26 Scheduler.SchedDayToSet Scheduler: set day of week to be confi gured (1:
Monday 2: Tuesday 3: Wednesday 4: Thursday 5:
Friday 6: Saturday 7: Sunday) 1 7 ReadWrite
27 SchedDayCfg[0].StartHr Scheduler: band 1 start hours 0 23 [h] ReadWrite
28 SchedDayCfg[0].StartMin Scheduler: band 1 start minutes 0 59 [min] ReadWrite
29 SchedDayCfg[0].WorkMode Scheduler: band 1 operating mode 0 Scheduler.SchedTBMo-
deUpLim ReadWrite
30 SchedDayCfg[1].StartHr Scheduler: band 2 start hours 0 23 [h] ReadWrite
31 SchedDayCfg[1].StartMin Scheduler: band 2 start minutes 0 59 [min] ReadWrite
32 SchedDayCfg[1].WorkMode Scheduler: band 2 operating mode 0 Scheduler.SchedTBMo-
deUpLim ReadWrite
33 SchedDayCfg[2].StartHr Scheduler: band 3 start hours 0 23 [h] ReadWrite
34 SchedDayCfg[2].StartMin Scheduler: band 3 start minutes 0 59 [min] ReadWrite
35 SchedDayCfg[2].WorkMode Scheduler: band 3 operating mode 0 Scheduler.SchedTBMo-
deUpLim ReadWrite
36 SchedDayCfg[3].StartHr Scheduler: band 4 start hours 0 23 [h] ReadWrite
37 SchedDayCfg[3].StartMin Scheduler: band 4 start minutes 0 59 [min] ReadWrite
38 SchedDayCfg[3].WorkMode Scheduler: band 4 operating mode 0 Scheduler.SchedTBMo-
deUpLim ReadWrite
39 SchedDayCfg[4].StartHr Scheduler: band 5 start hours 0 23 [h] ReadWrite
40 SchedDayCfg[4].StartMin Scheduler: band 5 start minutes 0 59 [min] ReadWrite
41 SchedDayCfg[4].WorkMode Scheduler: band 5 operating mode 0 Scheduler.SchedTBMo-
deUpLim ReadWrite
42 SchedDayCfg[5].StartHr Scheduler: band 6 start hours 0 23 [h] ReadWrite
43 SchedDayCfg[5].StartMin Scheduler: band 6 start minutes 0 59 [min] ReadWrite
44 SchedDayCfg[5].WorkMode Scheduler: band 6 operating mode 0 Scheduler.SchedTBMo-
deUpLim ReadWrite