Carel HeaterSteam 4 UR002, User Manual

Page: 28 / 92

28
ENG
“heaterSteam” +0300087EN - rel. 1.4 - 22.01.2021
Unit On/Off 1/9
ON
Unit On/Off 1/9
OFF
Fig. 6.p
6.6.6 Displ a y g r a p h i c a r ea 6 - Uni t s tat us i c on
Graphic display of unit status via icons. The status may be:
Fill (fi ll valve active)
Drain (drain pump active)
Steam production
Minimum water level in the boiler (yellow and red LEDs on,
heaters immersed)
Water level above the maximum in the boiler (green LED on,
heaters immersed)
Tab. 6.c
6.6.7 M a in m e nu
The parameters can be set using the keypad: press to access and
UP/DOWN to scroll the main menu.
Fig. 6.q
Main menu icons:
A. Clock
B. Time bands
C. Alarm thresholds
D. Inputs/outputs
E. Settings
Tab. 6.d
A. Clock: current date/time and time zone setting.
B. Time band: time band and daily settings.
C. Alarm thresholds: minimum and maximum thresholds for the main room
probe and maximum threshold for the limit probe.
D. Inputs/outputs:
Display analogue probe
readings Main probe
Limit probe
Preheating probe (NTC)
conductivity
Digital input status remote on/off
motor protector
level sensor: low
level sensor: high
foam sensor
Analogue outputs current production
Digital output status unit On/Off
contactor
drain pump
fi ll valve
SSR/fan
Foam sensor value read
threshold
foam?
E. Settings: once having accessed the Settings menu, login details need to be
entered.
Use the password 0044 to enter the Maintenance settings.
Use the password 0077 to enter the Installer settings.
Settings menu icons:
Index Icon Menu Menu type Control type
A. Control
Installer
Maintenance heaterSteam process
heaterSteam titanium
B. Functions
Installer
Maintenance heaterSteam process
heaterSteam titanium
C. Confi guration
Installer heaterSteam process
heaterSteam titanium
D. Network
Installer heaterSteam process
heaterSteam titanium
E. Backup
Installer heaterSteam titanium
F. Manual mode
Installer
Maintenance heaterSteam process
heaterSteam titanium
G. Initialisation
Installer
Maintenance heaterSteam process
heaterSteam titanium
H. Supervisor
Installer heaterSteam process
heaterSteam titanium
I. Logout
Installer
Maintenance heaterSteam process
heaterSteam titanium
6.7 Remote installation of the touch display
To install the 4.3” touch screen in a remote position, use kit P/N
HCTXRC0000. The kit comprises a touch display, a 24 Vdc power supply,
a telephone cable and a telephone splitter for simultaneous connection
of both displays (one in the remote position and the other installed on
the humidifi er).
6.8 Complete programming menu tree
Below is the complete tree of the confi guration menu. Remember that the
screen index at the top right on the display corresponds to the sequence
of indices in each menu to reach the specifi c page (see paragraph 4.5 for
further details”). There are two types of menu: Installer and Service.