8
Montaggio CARICA BATTERIA
PRG851
02-03-2000
DM0476
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
FIG.4 (senza contenitore)
E
D
Caution!
The wires which connect the
batteries to the battery charger must
never be short circuited, this could
damage the batteries and in the worst
case could cause burns (if the contact is
made to metal parts which are touching
the skin).
• Connect the two batteries in series (fig.4.
Det. "
D
").
Attention:
depending on the make of
battery used the positive and negative
poles "
+
" and "
-
" could be positioned
differently.
• Insert the batteries into the slots by
slightly bending the holding tabs "
E
"
upwards. Make sure that the fastons
remain visible after the insertion of the
batteries (towards the outside).
Attention!
Make sure that the transformer
primary wire is disconnected.
• Cut the four wires "
F
", coming from the
transformer, near the fastons (fig. 5 det.
"
G
"):
- For PRG851:
grey/grey (
0-24Vac
)
pink/red
- For PRG852:
grey/grey (
0-24Vac
)
red/red (
0-20Vac
)
then strip the ends (fig. 5 det. "
H
").
• The faston of the fifth wire "secondary
2" (brown,
15V
: for PRG851) or the fas-
tons of the two brown wires (
0-15V
: for
PRG852) coming from the transformer
must not be cut. They must be con-
nected directly to the transformer.
Montaggio CARICA BATTERIA
PRG851
02-02-2000
DM0470
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
FIG.3
F
G
H
5
4
5
INSERTING THE BATTERIES
PREPARING THE WIRES
Summary of Contents for PRG850BC
Page 27: ...27 NOTES...