Cardin PRG850BC, Installation And Assembly Instructions

Page: 10 / 28

10
The procedure to be followed to connect the batteries to the battery charger is as follows:
• Remove the fuse " F2 " from the programmer circuit board.
• Connect the batteries to the battery charger (The battery charger must not be powered up!) and close the
jumper " J1 " then connect the battery as follows:
- Battery negative connects to binding post " 9 " - Battery positive connects to binding post " 10 "
If LED " L1 " lights up, the connection is correct; if LED " L1 " does not light up, invert the connection to the
batteries; open jumper " J1 ".
• Connect the wires to the battery charger terminal board as follows (see fig. 7 det. M ):
1,2 Binding posts for the 20 Vac (red/red) "secondary 3" wires coming from the transformer.
3,4 Binding posts for the ( 0 - 24V : grey/grey) "secondary 1" wires.
5 Output to be connected to the faston marked “ V5-M2 ”
6 Output to be connected to the faston marked “ V4-M2 ”
7 Output to be connected to the faston marked “ V1-M2 ”
8 Output to be connected to the faston marked “ V0-M2 ”
• Close the battery charger container and slide it into the battery holder and circuit board unit as shown
in figure 7. det. "L" .
• Insert the terminal block into its seat carefully following the direction indicated in detail "
M
"
• Replace the fuse "
F2
".
Attention! The transformer for PRG851 has 8 wires:
• Primary: White/Black 0-230 Vac
• Secondary 1: Grey/Grey 0-24 Vac
• Secondary 2: Brown/Brown 0-15 Vac
• Secondary 3: Red/Red 0-20 Vac
BATT.
12V
TRANS.
RD
15V
0V
LINE 230V 50Hz
BATT.
12V
24V
0V
PRG850BC0
17-04-2001
DI0174
Description : PRG852
Product Code :
Date :
Drawing number :
CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
Collegamento carica batteria
V5
PRG852
V3
V4
V2
Fuse T3.15A
VB
V1 V0
2 3 1 4
10 9 8 7 6 5 16 15 14 13 12 11 22 21 20 19 18 17 28 27 26 25 24 23
Sec3 Se
c2
S
ec
1
F2
Fuse F1A
F3
Fuse F10A
CS1072.01B
DI0173
RELA
Y 1
1 2 3 4 5 6 7 8 9 10
L1
RELA
Y 2
RELA
Y 3
P1
L2
Fuse F1.6A
F5
J1
J1
Fuse F10A
F4
RD
BR
BR
Montaggio CARICA BATTERIA
PRG851
17-02-2006
DM0758
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
FIG.5
L
M
1 2 3 4 5 6 7 8
9 10
1 2 3 4 5 6 7
8 9 10
BR
BR
7
CONNECTING THE BATTERY CHARGER TO THE PRG852
Rd = Red
Br = Brown