Section 5: Data Management
Page 52
©2002 Cardiac Science, Inc.
300282-002 Rev. E0
Transferring Data to a Rescue Data Card
Rescue data can be transferred from the Survivalink AED’s internal
memory to a blank Rescue Data Card. To transfer the rescue data from
internal memory to a rescue data card:
1.
Close the Survivalink AED lid.
2.
Open the data access door.
3.
Insert a blank Rescue Data Card into the card slot.
4.
Open the lid.
5.
Hold down the “Rescue/Resume” button. When the GREEN “Battery
Status” indicators begin to rapidly sequence, the rescue data will
transfer the from the Survivalink AED’s internal memory to the
Rescue Data Card. The voice prompt will say,
“Program mode”.
Note: While transferring data to a rescue card, Survivalink AEDs
equipped with the optional text display will display the following:
“COPYING DATA TO CARD”.
To prevent loss of data, press the “Rescue/Resume” button only while the
“Battery Status” indicators are sequencing.
6.
When the data transfer is complete, the voice prompt will say,
“
Card
full. Storing internally.”
Remove the Rescue Data Card from the card
slot.
7.
Close the lid and data access door.
Retrieving Data From a Rescue Data Card
You can retrieve rescue data from a Rescue Data Card two ways:
• Inserting the Rescue Data Card into a compact flash card reader on
a personal computer, or
• Inserting the Rescue Data Card into the Survivalink AED card slot,
connecting the Survivalink AED to a PC using the serial
communication cable and retrieving the data using RescueLink.
Once the rescue data has been retrieved, erase the Rescue Data Card to
prepare for the next rescue.
More information on retrieving and erasing data from a Rescue Data
Card is in the RescueLink User Manual.
