45
NOTE: This ATV uses resistor-type spark plug to avoid jamming electronic
parts. Improper spark plug selection may cause electronic interference with
your ATVs ignition system, resulting in the vehicle performance problems.
Use recommended spark plugs.
To install a spark plug turn it in as far as possible with your fingers, then
tighten it with a wrench.
Spark Plug Cross Reference:
TORCH D8RTC ONLY
To maintain a proper functioning spark
plug, keep the plug free of carbon.
Remove carbon from the plug with a wire
or pin, and adjust the gap to 0.6~0.7mm
(0.024 - 0.028 in) for a good ignition. Use a
thickness gauge to check the gap.
Summary of Contents for 250
