49
Battery Replacement:
· Remove old battery from under seat. The battery bracket will need to be
removed (see figure 28). Mark which cable is connected to the positive
terminal (+) and which cable is connected to the negative (-) terminal.
· Clean cable connectors with wire brush or sandpaper to remove
oxidation.
· After charging, install new battery. Put dielectric grease on the battery
terminals to avoid corrosion. Connect cables to the proper terminals.
Positive cable to positive terminal
Å
and negative cable to negative
terminally.
· Positive (+) cable is red and larger in diameter. Negative y cable is black
and smaller of the two in diameter. CONNECT NEGATIVE CABLE LAST.
· Torque terminal bolts to 40 in. /lbs.
· Securely fasten battery to the vehicle using metal battery strap.
Summary of Contents for 250
