64
REAR HAND AND FOOT
BRAKE ADJUSTMENT
1. Try to move the vehicle backward
and forward when the rear hand
brake is applied. If the rear wheels
can turn, adjust the brake to lock
the wheels securely.
2. Measure the amount of free play
in the rear hand brake lever. The
free play should be about 5~7mm
(0.2~0.3in).
3. Try to move the vehicle backward
and forward when the rear foot
brake is applied. If the rear wheels
can turn, adjust the brake to lock
the wheels securely.
4. After any adjustment of the brake
adjustment nuts, check again to
make sure the front rear wheels
cannot turn when the brake is
applied.
REAR BRAKE SHOE
INSPECTION
1. Locate brake wear indicator on outside
of brake drum.
2. Check the position of the needle to see
if it has reached the maximum wear limit.
3. If maximum wear limit has been
reached (needle is at the end of the brake
wear indicator), replace brake shoes as a
set.
Summary of Contents for 250
