![background image](http://html.mh-extra.com/html/canyon/250/250_owners-manual_493940061.webp)
58
REAR GEAR CASE LUBRICATION
To check rear gear case oil:
1. Place vehicle on level ground
2. Remove gear case fill cap.
3. Inspect oil level. Oil level should be up to
the brim of the hole.
4. If oil is low, add specified oil (SAE 80 API
G- 4 Hypoid gear oil).
5. Tighten fill cap to 23Nm (17ft.lb)
To change gear oil:
1. Place vehicle on level ground
2. Remove gear case cover.
3. Place container under gear case.
4. Remove fill cap.
5. Remove oil plug.
6. Let oil drain out completely
7. Install the drain plug and tighten
24Nm (18 ft lb).
8. Install gear cover and tighten bolts
9. Add gear oil (SAE 80 API G-4 Hypoid
Gear oil) fill to brim of hole
approx. 9 oz (266ml
)
10. Install fill cap and tighten to 23Nm
(17 ft lb.)
Summary of Contents for 250
