Canon XJ22 7.3B Series, Operator'S Manual

Page: 202 / 326

E4-50
4. Menu screen – Zoom
Setting the servo type from the zoom demand
Either the speed servo or position servo can be set as the servo type from the zoom demand.
A 1
A 2
V
R
[ ] 1
VTR
FRM1 RET
EXT
I G : 5 0
Menu
[ IND ]
Movement
CurveMode
Control:
Zoom
[ ]
Sped
Movement
CurveMode
Control:
Zoom
[ ]
Posi
Tracking:
F-Hold:
OFF
OFF
Movement
Zoom
[ ]
(D)
Sped Posi
Set Zoom
[ ]
Menu
x4 x5 or
Zoom – Setting the servo type from the zoom demand
Top initial screen
Zoom screen
IMPORTANT: Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
1. Push the key, push the
Set
key and push the key four times.
The display is switched to the Zoom screen.
2. Push the key five times.
An underline appears below [Control].
The function set last or default function is highlighted.
3. Push the key or key.
Push the left or right key to select {Sped} or {Posi}.
※
(NOTE): When {Posi} has been selected, only one demand connector can be connected.
Normally, {Sped} is selected.
Selection item
Function
(D): Default value
Speed servo Position servo