Canon XJ22 7.3B Series, Operator'S Manual

Page: 145 / 326

E3-13
3. Top screen
Switchable mode settings
IMPORTANT: Use of the settings is shared by all users. For this reason, there is no need for user selection before
proceeding.
VTR
A 1
FRM1
A 2
V
RET
R
[ ] 1
Menu
[ IND ]
I G : 5 0
VTR
A 1
FRM1
A 2
V
RET
R
[ ] 1
Menu
[ IND ]
I G : 5 0
1
[ Frm1 ] [ Frm2 ]
[ ]
Menu
[ Z.M. ] [Trk]OFF
[CAFS] ON
EXT
1
[ Frm1 ] [ Frm2 ]
[ ]
Menu
[ Z.M. ] [Trk]OFF
[CAFS] ON
Auto
Auto
Auto
Auto
1
[ Frm1 ] [ Frm2 ]
[ ]
Menu
[ Z.M. ] [Trk]OFF
[CAFS] ON
EXT
1
[ Frm1 ] [ Frm2 ]
[ ]
Menu
[ Z.M. ] [Trk]OFF
[CAFS] ON
Auto
16 : 9
16 : 9
Auto
1. Push the key four times,and push
the key.
The function set last or default function is
highlighted.
2. Push the
Set
key.
The display starts blinking.
3. Push the key or key.
Push the left or right key until the function to
be changed to appears.
4. Push the
Set
key.
The display stops blinking and reverts to being
highlighted, and the setting is entered.
(D)
Set
Auto
Auto 4:3 16:9
Set
˜
4 [ IND ]
Selection item
Function
or
Default value
3. Top screen – Swithable mode setting
Top initial screen
Mode selection
AUTO mode: Select this when the
camera has an interface which
enables it to supply the command
signals which automatically
change the switchable function,
to the lens.It is automatically
selected in line with the selection
at the camera.
4:3 mode:
Select this when using a camera
with an aspect ratio of 4:3.
16:9 mode:
Select this when using a camera
with an aspect ratio of 16:9.
※
(NOTE): The 16:9 mode is
established when the
AUTO mode is selected
and the unit is used
together with a camera
which does not allow the
automatic switching of the
switchable function.
※
(NOTE): In the case of a lens which
does not incorporate a
crossovear unit, the
icon cannot be selected.
In this case, only the
mark appears on the
display.
AUTO
Mode Set Extender display
16 : 9
4 : 3
STANDARD
SWITCHABLE
16 : 9
Camera Used
SWITCHABLE
4 : 3
2.0x 1.0x
1.0x
2.0x
(1.2x)
(0.8x)
2.4x 1.0x
*2
*2
(0.8x)
*1
*2
*1: Nothing is displayed if the lens has a built-in crossover unit.
*2: Shown in parentheses are the displays which appear during manual operation.
In the case of a lens which in corporate a crossover unit, uses it select this when using a camera settings.
IE Screen
The IE status is displayed as shown below.
IE Display
16:9,4:3 mode of the auto
matie switching camera
4:3 mode camera 16:9 mode camera