Canon XJ22 7.3B Series, Operator'S Manual

Page: 201 / 326

E4-49
4. Menu screen – Zoom
IMPORTANT: Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
Setting the analog demand curve characteristics
The characteristics of the zoom speed can be varied in response to the amount by which the analog demand is tilted.
(Bear in mind that the display is switched to another screen when these characteristics are set.)
A 1
A 2
V
R
[ ] 1
CurveMode
Zoom
Demand:
[ ]
5
VTR
FRM1 RET
EXT
I G : 5 0
Menu
[ IND ]
Movement
CurveMode
Control:
Zoom
[ ]
OFF
CurveMode
Zoom
Demand:
[ ]
CurveMode
Zoom
Demand:
[ ]
D5
7
Tracking:
F-Hold:
OFF
OFF
Movement
Zoom
[ ]
1 2 3 4 D5 6 7 8 9
Set Set Set
x4 x4 or Zoom
[ ]
Menu
Top initial screen
Zoom screen
Screen A
CurveMode screen
1. Push the key, push the
Set
key and push the key four times.
The display is switched to the Zoom screen.
2. Push the key four times.
An underline appears below [CurveMode].
3. Push the
Set
key.
The display is switched to the CurveMode screen.
4. Push the key.
An underline appears below [Demand].
The function set last or default function is
highlighted.
5. Push the key or key.
Push the left or right key until the function
to be changed to appears.
6. Push the
Set
key.
The display returns to Screen A.
(D): Default value
Zoom – Setting the analog demand curve characteristics
Selection
item
(1)
(9)
MAX
Amount of change resulting
from zoom mode adjustment
Zoom speed
Amount by which analog demand is tilted
Zoom direction
Wide angle Telephoto