Canon XJ22 7.3B Series, Operator'S Manual

Page: 136 / 326

E3-4
3. Top screen
[ ] 1
[ ] 2
VTR
A 1
FRM1
A 2
RET
R
V
[ ] 1
VTR
A 1
FRM1
A 2
V
RET
R
[ ]
Menu 1
VTR
A 1
FRM1
A 2
V
RET
R
[ ]
Menu 2
Menu
[ IND ]
EXT
[ IND ]
EXT
I G : 5 0
I G : 5 0
I G : 5 0
[ IND ]
3. Top screen – User selection
User selection
With this product, detailed settings can be established by individual users who will be using the product, and these
settings can be stored in the memory. Settings can be stored for a total of 9 users. (User No. 1 to 9)
A default user, who can change the settings and use them on a temporary basis from the time the power is turned on
until the time it is turned off, is also provided. (User No. 0)
Only the number of the user who will use it can be selected on the Top screen.
The detailed settings tailored to each user are performed on the Menu screen. (See “4. Menu screen – User”)
Top initial screen
Set
[ ] 1
Set
0
(D)
1 2 3 4 5 6 7 8 9
[ IND ]
Selection item
Setting stor-
age
Settings cannot be stored.
The settings cannot be stored but they
can be changed temporarily. The default
values are restored by selecting the user
or turning off the power of the lens.
Settings can be stored on a user by user basis.
(D): Default value
or
[ ]
1. Push the key, and Push the key.
The last setting or default value is
highlighted.
2. Push the
Set
key.
The display starts blinking.
3. Push the key or key.
Push the left or right key until the number to
be changed to appears.
4. Push the
Set
key.
The display which was blinking is naw
highlighted to indicate that the change has
been entered.