Canon XJ22 7.3B Series, Operator'S Manual

Page: 159 / 326

E4-7
4. Menu screen – User
(2) Initializing the settings established for all the users
The settings established for all the users can be initialized so that they are returned to the default values.
All User
Reset Now.
Name:
User
ResetAll
Copy
1
ResetAll
User
User:
AllUser:
1
y/n
y/n
Name:
User
ResetAll
Copy
1
㧙㧙㧙㧙㧙㧙㧙㧙
ResetAll
User
User:
AllUser:
1
y /n
y/n
VTR
A 1
FRM1
A 2
V
RET
R
[ ] 1
Menu
[ IND ]
EXT
I G : 5 0
No. :
User
1
Name:
ResetAll
1
A
㧙㧙㧙㧙㧙㧙㧙
A
㧙㧙㧙㧙㧙㧙㧙
ResetAll
User
User:
AllUser:
1
y/ n
y/n
User – Initializing (2) Initializing the settings established for all the users
※
(NOTE): There is no need to select a user.
Top initial screen
User screen
Title Reset
Reset screen
1. Push the key,and push the Set key.
The display is switched to the User screen.
The operating steps taken be-
tween steps 1 to 5 (within the
two dotted parallel lines) can be
undone without initializing the
settings. To return to the origi-
nal screen, push the up key.
To turn off the display without
initializing the settings, push the
DISPLAY switch.
2. Push the key three times.
An underline appears below [ResetAll].
3. Push the
Set
key.
The display is switched to the Reset screen.
4. Push the key twice.
The operator is asked whether the settings of
all the users are to be initialized or not.
The screen now shows the “Reset Now” (initializing) message
for a few moments before returning to Title Reset.
This completes the initializing.
Title Reset
x3
x2 or Set
User 1
Set Set
Menu
5. Push the key to select {y}.
6. Push the
Set
key to enter the decision.
※
(NOTE): The following items are the only values which are not initialized:Auto
iris gain value,Remote iris gain value,F-Hold setting,Encoder output
setting,IND screen follow-up display setting,Switchable setting,default
screen settings and Adjustment of Camera Fol Voltage.