Canon XJ22 7.3B Series, Operator'S Manual

Page: 164 / 326

E4-12
4. Menu screen – User
(2) Copying the data settings established for all the users into another lens
A dedicated cable purchased separately is required for this operation. For further details, consult a Canon sales rep-
resentative or your dealer.
User – Copying data between lenses
The operating steps taken be-
tween steps 1 to 10 (within the
two dotted parallel lines) can
be undone without copying the
settings. To return to the origi-
nal screen, push the up key.
To turn off the display without
copying the settings, push the
DISPLAY switch.
Preparations prior to operation
• Plug one end of the dedicated cable (20P-20P) into the zoom remote & focus remote connector (20-pin)
of the copy source lens and the other end into the corresponding connector of the copy destination lens.
• Turn on the power of the copy source lens and copy destination lens.
• Push the DISPLAY switch on the copy source lens to turn on the display. (Do not turn on the display of
the copy destination lens.)
ToOtherLens
User
Connect:
1
y/n
ToOtherLens
User
Connect:
1
y/ n
ToOtherLens
User
Connect:
1
y /n
VTR
A 1
FRM1
A 2
V
RET
R
[ ] 1
Menu
[ IND ]
EXT
I G : 5 0
User
Copy
ToOtherLens
1
No. :
User
1
Name:
ResetAll
1
Access: Unlock
Top initial screen
User screen
Screen A
ToOtherLens screen
1. Push the key,and push the
Set
key.
The display is switched to the User screen.
2. Push the key five times.
An underline appears below [ToOtherLens].
3. Push the Set key.
The display is switched to the ToOtherLens
screen.
4. Push the key twice.
An underline appears below [Connect], and
either {y} (YES) or {n} (NO) can now been
selected.
5. Push the key, and select {y}.
Continued on next page
6. Push the
Set
key.