Canon XJ22 7.3B Series, Operator'S Manual

Page: 192 / 326

E4-40
4. Menu screen – Iris
Iris – Setting the iris correction to ON or OFF
Setting the iris correction to ON or OFF
The light quantity drops when the extender (2.0x) is used. To compensate for this, a function for correcting the iris by
opening it by an amount equivalent to 2F can be set.
IMPORTANT: Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
A 1
A 2
V
[ ] 1
VTR
FRM1 RET
R
EXT
I G : 5 0
Menu
[ IND ]
＊
Iris
[ ]
[ I‑Gain ]
Comp:
[ I‑Gain ]
ON
Close: OFF
Iris
[ ]
Comp:
[ I‑Gain ]
Close: OFF
ON
Iris
[ ]
Comp:
Close:
OFF
OFF
ON OFF
Menu
Set
(D)
x3 x2 or Iris
[ ]
1. Push the key, push the
Set
key and push the key three times.
The display is switched to the Iris screen.
2. Push the key twice.
An underline appears below [Comp].
The function set last or default function is highlighted.
3. Push the key or key.
Push the left or right key to select {ON} or {OFF}.
※
(NOTE): The iris may not close completely when the iris correction function is set to ON and the extender
(2.0x) is used. If this is the case, follow the procedure for “Setting the iris close detection to ON or
OFF”, and set the detection to ON.
Top initial screen
Iris screen
Selection item
Function
(D): Default value
Iris correction No iris correction
＊
: This appears when
ON is selected as the
{Comp} setting.