manualshive.com logo in svg

Canon XF205, Instruction Manual

Share
Download
Canon XF205 Instruction Manual Download Page 23

2

23

Eng

lis
h

Preparations

Preparing the Power Supply

You can power the camcorder using a battery pack or directly using the compact power adapter. If you connect 
the compact power adapter to the camcorder while a battery pack is attached, the camcorder will draw power 
from the power outlet.
Charge battery packs before use. For approximate charging times and recording/playback times with a fully 
charged battery pack, refer to 

Charging Times

 (

A

233) and 

Recording and Playback Times

 (

A

233).

Using a Battery Pack

You can power the camcorder using the supplied BP-955 or an optional BP-950G, BP-970G or BP-975 Battery 
Pack. The BP-955 and BP-975 are compatible with Intelligent System, meaning that you can check the 
remaining battery time.

Charging the Battery Pack

Charge battery packs using the supplied CA-930 Compact Power Adapter. 
Before charging, remove the terminal cover of the battery pack.

1 If the DC cable is connected to the compact power adapter, disconnect 

it.

• If the DC cable is connected to the compact power adapter, charging 

will not start.

2 Connect the power cord to the compact power adapter.

3 Plug the power cord into a power outlet.

4 Attach the battery pack to the compact power adapter.

• Press lightly and slide the battery pack in the direction of the arrow until it 

clicks.

• The CHARGE indicator starts flashing and also indicates the battery pack’s approximate charge. The 

indicator will stay on when charging has completed.

0-34%: Flashes once per second

35-69%: Flashes twice per second

70-99%: Flashes 3 times per second

5 When charging has completed, remove the battery pack from the compact power adapter.

6 Unplug the power cord from the power outlet and disconnect it from the compact power adapter.

IMPORTANT

• Do not connect to the compact power adapter any product that is not expressly recommended for use with this 

camcorder.

NOTES

• We recommend charging the battery pack in temperatures between 10 ºC and 30 ºC (50 ºF and 86 ºF). 

Outside the temperature range of 0 ºC to 40 ºC (32 ºF to 104 ºF), charging will not start.

• To charge the battery pack, disconnect the DC cable from the compact power adapter.

햳

햵

햴

햲

CHARGE indicator

COP

Y

Summary of Contents for XF205























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands