Handling Precautions
150
Handling Precautions
Camcorder
Be sure to observe the following precautions to ensure maximum performance.
• Do not carry the camcorder by the LCD panel. Be careful when closing the LCD panel.
• Do not leave the camcorder in places subject to high temperatures (like the inside of a car parked under direct
sunlight), or high humidity.
• Do not use the camcorder near strong electromagnetic fields such as near powerful magnets and motors, MRI
machines or high-voltage power lines. Using the camcorder in such places may cause anomalies in the video or
audio or video noise to appear.
• Do not use the camcorder’s Wi-Fi functions inside hospitals or medical clinics. In addition, do not use them
near medical equipment or sensitive electronic devices as it may affect their performance. In the case of
pacemakers, keep the camcorder at least 22 cm (8.7 in.) away from the device.
Regarding the use of Wi-Fi functions aboard aircraft, be sure to follow the instructions of the flight crew/cabin
attendants.
• The camcorder’s Wi-Fi functions may be subject to interference from devices such as cordless phones and
microwave ovens. Keeping as much distance as possible from these devices or using the camcorder’s Wi-Fi
functions at a different time of day may reduce such interference.
• Do not use or store the camcorder in dusty or sandy places. The camcorder is not waterproof – avoid also
water, mud or salt. If any of the above should get into the camcorder it may damage the camcorder and/or the
lens. Consult a Canon Service Center as soon as possible.
• Be careful to avoid dust and dirt particles accumulating on the lens or entering the camcorder. When you finish using
the camcorder, make sure to remove the lens hood and attach the lens cap to the camcorder.
• Do not point the camcorder or viewfinder unit toward an intense light source, such as the sun on a sunny day or an
intense artificial light source. Doing so may cause blindness.
• Do not point the camcorder or viewfinder unit toward an intense light source, such as the sun on a sunny day
or an intense artificial light source. Doing so may damage the image sensor or the camcorder’s internal
components. Be careful especially when using a tripod or shoulder strap. When you are not using the
camcorder, make sure to attach the lens cap to the camcorder.
• When you are not using the viewfinder unit, make sure to attach the viewfinder unit cap to the unit.
• Be careful of heat generated by lighting equipment.
• Do not disassemble the camcorder. If the camcorder does not function properly, consult qualified service
personnel.
• Handle the camcorder with care. Do not subject the camcorder to shocks or vibration as this may cause
damage. When using the shoulder strap, do not allow the camcorder to swing and hit an object.
Long-term storage
If you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and at
temperatures not higher than 30 °C (86 °F).
