Canon XC10 Instruction Manual Download Page 109

Page: 109 / 165

109

Deleting Recordings

Menus

Table of Contents

Index

Deleting a Photo during Playback

1 Play back the photo you want to delete (

100).

2 Touch the screen to display the playback controls.

3 Delete the photo.

[

]

[

Proceed]

[Yes]

• The photo is deleted and the next photo is displayed. You can drag your finger left/right select another photo

to delete and then touch [

Proceed] again.

4 Touch [

5 In the playback controls, touch [

IMPORTANT

• Be careful when deleting recordings. Once deleted, they cannot be recovered.

• Save copies of important recordings before deleting them (

113 , 116).

NOTES

• Photos that were protected with other devices cannot be deleted with this camcorder.

• To delete all recordings and make all recordable space available again you may prefer to initialize the recording

media (

33).

Summary of Contents for XC10






































































































































































Search results

Summary of Contents for XC10

Reviews:

Related manuals for XC10

Brands by name

Popular brands

Canon XC10, Instruction Manual

Search results

Summary of Contents for XC10

Reviews:

Related manuals for XC10

Brands by name

Popular brands