Canon VK-64 Administrator'S Manual Download

Page: 66 / 282

Setting the User Management Tab

The

Storage Server Configuration

dialog,

User Management

tab allows you to set up

users and their privileges.

How to Display the User Management Tab

Double-click the

Storage Server Configuration

desktop icon.

The

Storage Server Configuration

dialog opens and the

Settings

tab is displayed.

Click the

User Management

tab to open it.

Administrator and Operator Status User

Administrators have access to the Viewer including Camera Server setup, recording
schedules and Viewer setup.

Operator Status Users can only access the Viewer windows (

➝

P. 162) created by

Administrator. Also, they only have access to live video and recorded video on Storage
Servers they have permission to access.

Users who have Operator Status cannot configure, register
and change Camera Servers, or configure and change
recording schedules.

By default, a user called “admin” is created. The password is
“NVR”. It is strongly recommended to change the user name
and password after installation.

It is necessary to set up users on all Storage Servers. A
particular user should be set up to have the same password
on each Storage Server.

Note

Summary of Contents for VK-64



























































































































































































































































































Search results

Summary of Contents for VK-64

Reviews:

Related manuals for VK-64

Brands by name

Popular brands

Canon VK-64, Administrator'S Manual

Search results

Summary of Contents for VK-64

Reviews:

Related manuals for VK-64

Brands by name

Popular brands