Canon VK-64 Administrator'S Manual Download

Page: 22 / 282

Operating Environment

Supported Camera Servers

The table below lists the Camera Servers that are supported by VK-64/VK-16.

This information is correct as of January 2007. For the latest information, please
refer to our WebView Product web page:canon.com/webview

Firmware Upgrade

The latest information concerning firmware can be found on the following Canon Web site:
canon.com/webview

Camera Server

Firmware Versions

VB-C300

Ver. 1.0

VB-C50FSi

Ver. 1.0 Rev. 68 or later

VB-C50FSi

Ver. 1.0 Rev. 68 or later

Ver. 1.0 Rev. 26 or later

VB150

Ver. 1.1 Rev. 39 or later

VB101

Ver. 3.0 Rev. 69 or later

VB-C50iR

VB-C50i

VB-C10R

VB-C10

Ver. 1.1 Rev. 33 or later
Ver. 1.2 Rev. 76 or later

If using a VB101, you can make use of a single camera
connected with VK-64/VK-16 at a time.

If using a VB150 with multiple cameras, there are restrictions
on frame rate.

If using the Simultaneous mode with the VB150, upgrade the
firmware to Version 1.1 Rev.39 or later.

Note

Summary of Contents for VK-64



























































































































































































































































































Search results

Summary of Contents for VK-64

Reviews:

Related manuals for VK-64

Brands by name

Popular brands

Canon VK-64, Administrator'S Manual

Search results

Summary of Contents for VK-64

Reviews:

Related manuals for VK-64

Brands by name

Popular brands