Canon VK-64, Administrator'S Manual

Page: 110 / 282

Configuring a Normal Schedule
110
●
Set Additional Options
To use the exposure, white balance,
and/or focus settings on the
Camera Control Panel , check the
corresponding check box.
Select a resolution for recording from the drop-down list. You can select from Low ,
Medium , High or Not specified .
If you select Not specified , the Storage Server does not attempt to change the
setting, rather it accepts whatever Night Mode setting and resolution the Camera
Server offers.
2
Correspondence between the specified resolution and actual
resolution is shown below.
Tip
Small Size
Medium Size
Large Size
160 x 120 (NTSC)
192 x 144 (PAL_ VB-C50i series)
320 x 240 (NTSC)
192 x 144 (PAL_ VB-C50i series)
640 x 240 (NTSC_ VB101/VB150)
640 x 480 (NTSC_VB-C10/VB-C50i series/VB-C300)
768 x 576 (PAL_ VB-C50i series)
The additonal option is only allows to use with VB-C300. Other
models cannot use these options.
If the Exposure box is checked, the Backlight compensation
option will be disabled.
If the Preset Tour is enabled, you cannot use additional
options.
The additional option settings will be return to the original
settings if the Camera Server settings are changed during
schedule execution.
Note
In the Night Mode, the IR cut filter is disabled and the camera
acts as an IR camera. After the schedule expires, the Night
Mode will be disabled.
Day Mode activates the Camera Server’s IR cut filter to reflect
the infrared ray and pass the visible rays.
Tip