manualshive.com logo in svg

Canon VIXIA HF M30, Quick Manual

Share
Download
Canon VIXIA HF M30 Quick Manual Download Page 550

158

The message “Not enough disk space for the workspace.” is displayed.

The following free space is required in the workspace to create a disc. Increase the free space in the 
workspace, or change the workspace in the Preferences (P.147).

DVD/AVCHD List : at least three times the volume of data to be written on the disc
Blu-ray List : at least twice the volume of data to be written on the disc
DataDisc List : at least the size of data to be written on the disc

The message “Data is too large to write to.” is displayed.

Decrease the total volume of the files to write on a disc. The capacity of the disc varies depending on 
the disc type. Also, note that you may not be able to write on a disc if the total volume of the files is 
close to the disc capacity.

DVD-R, DVD-RW : 4.7GB
DVD-R DL : 8.5GB
BD-R, BD-RE : 25GB
BD-R DL, BD-RE DL : 50GB

Disc writing fails when using a rewritable disc after erasing the recorded data.

Disc creation may fail if the data on a rewritable disc has been erased using software other than 
ImageMixer 3. When using a rewritable disc which has already been recorded, insert the disc as it is 
and erase the recorded data using the writing options of ImageMixer 3.

I want to change the menu title and the names of titles on the disc.

You should enter the menu title and title names before writing a disc.

Right-click the Writing List and select [Edit (the name of the List that you selected)...] to change the 

menu title. 
Refer to P.62  for changing titles.

•
•
•

•
•
•
•

•

•

Summary of Contents for VIXIA HF M30



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands